TECHNICAL DATA

SANCHOW RELEASE AGENT

MR-101

INTRODUCTION

SANCHOW release agent is the product of Sanchow Chemicals Co., Ltd for use in the molding of unsaturated polyester resins and vinylester resins.

SANCHOW release agent is primarily recommended as internal release additive for use in those types of molding operations where external heat is applied during the curing cycle and are not recommended generally for room temperature curing systems.

SANCHOW release agent is incorporated directly into the resin eliminating the need for an external mold release agent, improving resin flow and line speeds, reducing release agent cost on a utility basis when compared with other, more conventional internal release agents. An effective addition of SANCHOW release agent will not have any adverse affect on the curing and cured resin. It will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating. It can also protect ferrous metal molds from corrosion during storage. It is especially effective when used in low shrink polyester or vinylester resins which produce exceptionally smooth surfaces when cast.

PROPERTIES

APPLICATION INSTRUCTIONS

General: For best results, laboratory tests or pre-production trials should determine the optimum addition level. SANCHOW release agent is effective with a range of 0.5 to 1.5 parts per 100 resin by weight, excluding reinforcements, pigments and fillers. High amount of filler may require a higher percentage of internal release than the indicated maximum.

Mixing: Mix into resin prior to addition of catalysts, fillers, and other resin additives.

PERSONAL SAFETY AND FIRST AID   

Health Hazards: MR-101 causes burns to the eyes and skin. Undiluted, it is corrosive to rabbit skin. It has a low acute oral toxicity.

Safety Precautions: Do not get it in the eyes or on the skin. Use rubber gloves and adequate eye protection.   

First Aid: In case of contact, flush the eyes or skin immediately with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Wash clothing before reuse.

STORAGE AND HANDLING

It should be stored in a cool dry place and kept closed to prevent contamination.

Sanchow Chemicals Co., Ltd

Add: Liulipin, Shiyan, Hubei 442716, China

Tel: +86-719-5716269

Fax: +86-719-5716329

E-mail: 13597868869@163.com